jamesclarkson Posted March 29, 2017 Share Posted March 29, 2017 I just wondered if I could lower my driving position by removing the seat runner under the Tillett seat?Can it be directly bolted to the same points as the runner? Are there any specific brackets required/available for this?Thanks in advance. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted March 29, 2017 Member Share Posted March 29, 2017 Lots of people have done this, but unfortunately the experiences and advice (including the need for spacers) are scattered across multiple threads.Jonathan Link to comment Share on other sites More sharing options...
DJ. Posted March 29, 2017 Share Posted March 29, 2017 On my Tillets, the base is curved down lower than the mounting points. I found 1 inch spacers were necessary to mount it on a flat surface, so it wasn't possible to lower it much more than on the runners Link to comment Share on other sites More sharing options...
jamesclarkson Posted March 29, 2017 Author Share Posted March 29, 2017 Thanks for that. Reading some of the posts in the link suggested that I am unlikely to gain a great deal but changing it over. I might have a look at a bag seat as an alternative. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now