Paul McKenzie Posted February 18, 2003 Share Posted February 18, 2003 Would be grateful for any tips on fitting a JPE aeroscreen that I've just bought. I've looked in the archives, but the info. there is a bit confusing. What I want to do is mount it so that it's a quick change between the aero and normal screens, and of course so the holes I'll have to drill are not visible with the normal screen in place. Thanks for any advice (other than you shouldn't have bought it!) Paul Link to comment Share on other sites More sharing options...
Anthony Posted February 18, 2003 Share Posted February 18, 2003 Hi Paul, Suggest that you carefully mark out exiting screen with tape and carefully remove screen. From the gap left this will show clear area where fixings can go Place marking tape in rough area of 5 fixings and then place JPE screen in final place and mark round fixing position ( blocks ) Remove JPE and drill holes The JPE screen fits where it touches and may not be a precise fit ! Link to comment Share on other sites More sharing options...
Paul McKenzie Posted February 18, 2003 Author Share Posted February 18, 2003 Thanks, Anthony. What are the 'blocks' you mentioned and is it necessary to put some sort of seal between the screen and scuttle to protect the paint? Link to comment Share on other sites More sharing options...
ian balson Posted February 18, 2003 Share Posted February 18, 2003 Paul, Check out the 7 Gallery here. Kevin has written a piece at the towards the bottom of his modification page. Rgds Ian Link to comment Share on other sites More sharing options...
Paul McKenzie Posted February 18, 2003 Author Share Posted February 18, 2003 Thanks, guys..spot on. Paul Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now