Tazio Posted February 28, 2017 Share Posted February 28, 2017 Anyone have a set of push through type centre caps for the original 13 inch Superlite wheels, these are the minilight type wheels? Link to comment Share on other sites More sharing options...
PROBE2 Posted February 28, 2017 Share Posted February 28, 2017 Hi, PM sent Link to comment Share on other sites More sharing options...
Barkalarr Posted March 1, 2017 Share Posted March 1, 2017 I've just bought some from caterham and finished them with the new Apollo badges... they look nice. Link to comment Share on other sites More sharing options...
Tazio Posted March 1, 2017 Author Share Posted March 1, 2017 If memory serves me right, and I am going back over 20 years, the original ones pushed through the centre hole from the back of the wheels. They were 65mm, if Caterham are still selling them I cannot find them on the parts website! Link to comment Share on other sites More sharing options...
Wrightpayne Posted March 1, 2017 Share Posted March 1, 2017 My original minator minilights circa 1998 came with shallow plastic caps that pushed in from the front.like these https://caterhamparts.co.uk/other/1406-centre-cap-kn-minator-wheels.html Link to comment Share on other sites More sharing options...
Wrightpayne Posted March 1, 2017 Share Posted March 1, 2017 or maybe these...https://caterhamparts.co.uk/other/5447-centre-cap-45x14-steel-wheel.html Link to comment Share on other sites More sharing options...
Tazio Posted March 1, 2017 Author Share Posted March 1, 2017 Ian,Thanks for that, the Minator ones will not fit, with my wheels the rear hub nut protrudes too much, as far as the ones for the 160 steel wheels, it depends if the are 65 mm ? Link to comment Share on other sites More sharing options...
mark_w Posted March 1, 2017 Share Posted March 1, 2017 would these suit , they are 2.5" or 63.5 mm a lot of wheels centre holes are this size might be worth rechecking to see yours are 65mmhttp://www.comp.co.uk/products/product.asp?item=chrome-plastic-2-5-cap-x4-2-3how they would look if they do fit here Link to comment Share on other sites More sharing options...
Tazio Posted March 1, 2017 Author Share Posted March 1, 2017 Mark,Many thanks for those, I have measured and re-measured, and the centre holes are 65mm.I've found some on ebay, and they are quite close to me, so I'll see if I can take the wheels over and make sure they fit. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now