620 r under nose cone

[A_redstone]

hi

anyone got a picture of the front of a 620r without the nose cone on ? I want to see how the rad and pipe work look like 

 

thanks

andy 

[Mark w]

 

Any help ?

The top one was in build at CC , the bottom one is mine , partially disassembled for some " mods "

 

[A_redstone]

Many thanks 

 

any front view on ?

trying to establish rad type and plumbing !

 

thanks again

 

 

 

andy 

[Mark w]

 

Any good ?

The bottom section of the rad is the oil cooler , the cooler for the supercharger is behind the oil cooler as a separate unit .

Impossible to photograph the plumbing behind the rad as its all very tight and the " air " pipes obscure the view .

 

[A_redstone]

Great thanks 

[A_redstone]

Thanks that helps to explain the changes in the nosecone !

[Mark w]

Plumbing 

Return water is via the metal rail above the exhaust headers and then the black rubber pipe in the picture of the green car to the top of the rad .

Water feed is from bottom near side of the rad , initially a rubber ( silicone ) pipe and then the alloy pipe which bolts on to the block below intake for cylinder no 1 .

Air goes from the filter intake box down to the Supercharger then along the NS of the car ( see second photo , blue car ), turns 90 degrees and runs along under the intercooler to the intake on the off side ( bottom ) of the intercooler . Once through the intercooler via the large pipe at the bottom of the "green " photo into the throttle body   .

Cannot remember the oil plumbing and the garage floor is too cold to be laying down on at this time of night ! 

 

 

[A_redstone]

Thanks !