Metal K series supersport plenum

[Dannyboy]

does anyone have one of these spare? This is the metal EU2 supersport plenum. My lower inlet manifold has cracked. 

Dan 

[garybee]

Is this the same as the VVC plenum (have one if so)?

[K7 VCT]

Will be different to the vvc one, try a local engineering company  to weld yours up??

[Dannyboy]

Not at all like the VVC one unfortunately. The lower manifold and spacing is completely different strangely. 

Old one can't be welded easily and is likely to refracture.. hence asking if anyone has one who has gone to DTH throttle bodies. 

[NickRob]

If you have no luck finding a metal one, I have a plastic one off a 2009 1.6k supersport if that is any use.

Nick

[Dannyboy]

Thanks Nick... I think I could convert but my throttle body is the original stepper motor one not the later TB one. If that's the case I'd adapt the VVC one I have - but I'd have to check whether that's permitted for the L7 club regs for sprints next year, hence ideally I'd like to replace like for like.

[TomB]

I've got one. Forward facing TB air filter, alloy manifold, back Supersport embossed plenum, 52mm TB. TPS has a possible intermittent fault. I can dig it out & send photos. 

[Dannyboy]

Tom..

i've already messaged you