Area Representative Iain McCallum Posted September 15, 2016 Area Representative Share Posted September 15, 2016 Hi guys,I am looking to replace the standard Dzus fastners underneath the nose cone with ones that have a wing nut attached.However there seems to be a variety of sizes available on the CBS site:2.5mm-3.37mm, 4mm, 3.8mm-4.6mm, 4.4mm-5.25.., 5mm-5.87mm6.3mm-7.1mm, 6.9mm-7.7mm, 7.5mm-8.4mm, 9mm What is the size of the standard ones supplied with the car (SV Sigma 2011) as I can't figure out how these measurements are arrived at?I don't particularly want to take off the old ones until I have the new ones availableThanks Iain Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 15, 2016 Member Share Posted September 15, 2016 From the archives.Jonathan Link to comment Share on other sites More sharing options...
Area Representative Iain McCallum Posted September 15, 2016 Author Area Representative Share Posted September 15, 2016 Thanks Jonathan. I had seen that post but the only number that appears in the CBS list is the 7.5mm-8.4mm, so is that the diameter or the length?.The post you pointed to talks about a length of about 21mm but that is not mentioned as part of the description so I am still none the wiser as to which to get!Maybe a phone call to CBS in needed! Link to comment Share on other sites More sharing options...
Paul McKenzie Posted September 15, 2016 Share Posted September 15, 2016 Diameter Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now