CageyH Posted August 22, 2016 Share Posted August 22, 2016 I have the VHPD race exhaust with the 7" silencer (this one - http://www.caterhamparts.co.uk/product.php?id_product=2929). I have not yet drilled the hole to fit the forward exhaust mount bracket, but as my mounting bracket on the catalytic converter has now cracked, I see that I need to support the weight.The issue is that the 7" silencer has no mounting bracket, so how do you join the two up?I do have the black support strut/bracket pictured in the kit, but to be honest I have no idea what this is for either? It does not look exhaust related to me. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted August 22, 2016 Member Share Posted August 22, 2016 I have not yet drilled the hole to fit the forward exhaust mount bracketAre you using Andrew's magnet trick?Jonathan Link to comment Share on other sites More sharing options...
CageyH Posted August 22, 2016 Author Share Posted August 22, 2016 I certainly intend to, once I have worked out how to connect the exhaust silencer to the bracket and bobbin. Link to comment Share on other sites More sharing options...
john milner Posted August 24, 2016 Share Posted August 24, 2016 That system is not designed to use a front mount just the rear one and four large primaries. There may be a way to use a front mount but I would be sceptical if it added much strength and may possibly cause problems with heat expansion. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now