Silver Machine Posted June 20, 2016 Share Posted June 20, 2016 I am replacing the electrical oil pressure sender and gauge with a mechanical set up. New gauge has a connection for the oil pipe and a live and neutral electrical connection for the illumination. I understand that as it goes.On removing the old electrical gauge it has 7 wires going to it. I can work out the ones for illuminating the gauge and the one from the sender. However I have two green wires that are both connected to terminal number 3 . Do any of you folk know what these are for? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted June 20, 2016 Member Share Posted June 20, 2016 Green: Accessories fused by the ignition switch. "Standard" wiring colours.These can be daisychained from instrument to instrument. Ditto earths. So check where they're going and that everything else works afterwards.Jonathan Link to comment Share on other sites More sharing options...
Silver Machine Posted June 20, 2016 Author Share Posted June 20, 2016 Thank you Jonathan. I will just leave them connected together by the spade and insulate with some shrink wrap. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now