old gimmer Posted May 26, 2016 Share Posted May 26, 2016 I'm fitting a oil temp sender to use switched with the water temp gauge, there is a black/yellow wire by the oil temp sender any tips on where to find it under the dash on a 2004 SV please. Link to comment Share on other sites More sharing options...
dodgedavidson Posted June 10, 2017 Share Posted June 10, 2017 Don't know if you've had any luck. I was looking to do the same when I fit my Apollo on my 2006 S3 K Series.I traced the Black/Yellow from down by oil pressure sender back to the engine loom connector on the rail under the inlet manifold. There's no connection on the vehicle side of the plug!I was debating about getting the bits for the loom plug but decided by the time I've fiddled around it will be quicker to run a new wire all the way.Cheers,Roger Link to comment Share on other sites More sharing options...
old gimmer Posted June 11, 2017 Author Share Posted June 11, 2017 I found both ends but there was no continuity, so I also fitted a new wire.Regards John. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now