David Brown Posted May 23, 2016 Share Posted May 23, 2016 Have just got a CSR which handily has a 12v Socket on the rear bulkhead between the seats. Want to fit my intercom in the boot and thought I could use the socket power feed for the intercom. To get to the back looks like a diff out job, will the socket prize out from the cockpit?Could always fit a 12v plug to the intercom but would prefer to wire from the back. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted May 23, 2016 Member Share Posted May 23, 2016 Don't know about access but JonL has just got to the back of his. I'd ask him.NB think about adding USB sockets if you're fitting anything. You can get single units that include both.Jonathan Link to comment Share on other sites More sharing options...
David Brown Posted May 23, 2016 Author Share Posted May 23, 2016 His sounds like it is probably fitted where I had the one on my K series, under the dash and easy to access. Link to comment Share on other sites More sharing options...
makingff Posted May 23, 2016 Share Posted May 23, 2016 Hi DavidGreat choice of 7!You can get to the socket if you remove the rear wheel. I did the same as you recently - it's fiddly but achievable. I took the opportunity to replace the socket with a dual USB version off eBay which is much more practical (and sealed which the Caterham version isn't)Let me know if you want any more info.Simon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now