Jump to content
Click here if you are having website access problems ×

DRE Shift Lights Bulk Buy


myothercarsa2cv

Recommended Posts

Some years ago, Martin kindly organised a bulk buy of these amazing little shift lights. After my 7 was written off, I had no need for mine any more and sold it on. Now I want one again (but for my hairdresser's car). If we get to 29 I'll make it 30 by getting 2 and putting it on the 2CV. 

Anyway, DRE have said we can get another deal on a bulk buy, I still need to confirm that they will allow us to specify what lights we want (they did last time) and also whether it's ok for everyone to just call up and pay if I let them know who's in, but for now, if you'd like one put your name down here and I'll take it from there. I've got 5 others already interested, so we're already up to a tenner off.

They are super easy to install on a newish 7 with standard gauges, I managed it! I wrote about it here. A search will reveal lots of information as well.

Details:

SLD5 Sequential shift light system

1 to 4 units at £79.95 each
5 to 14 units at £69.95 each
15 to 29 units at £65.00 each
30+ off at £60.00 each

If ordering over 5 units, they will not charge for carriage provided all the units are going to one address, if sent directly to the customer, then the postage will be £2.10 1st class signed for service.

More info here:

www.caraddiction.co.uk/sld5.htm
 

Link to comment
Share on other sites

I got one of these on the original bulk buy, and its still in service some 40000 miles later.  A great bit of kit, and well worth the cost.  Easy to programme, reasonably easy to install.  My only minor gripe that is the thin wires they use are hard work to connect in to the larger spade terminals and connectors I have under the dash.  I think I ended up stripping more insulation off then folding the bare wires around to make a fatter wire so it would fit the spade terminals.   

Link to comment
Share on other sites

I agree Tom, the wires are a bit skinny. I chopped the tacho wires and rejoined them and poked the DRE wires in with the tacho wire, so less of an issue with the crimping. Next time I think I'll splice in a proper three way connector, with tacho wires going to one side and DRE the other. That way it's fully reversable with not much effort.

Link to comment
Share on other sites

Hi John, in all honesty... Probably not much use to you. I had mine set up to come on about 5k rpm, and hit the red at 7k, so quite a broad band that suited me. I liked having the lights flash in the corner of my eye to tell me what I'm doing, but that's me. 

Link to comment
Share on other sites

Ok chaps. Here's the instructions.

1. PayPal your £67.10 to sales@digitalrace.co.uk
2. Add a note to the transaction or email jason@digitalrace.co.uk your:

  • name
  • postal address
  • preference for light colours (standard is green green amber amber red)
  • PayPal email address if different
  • your forum handle so he can tick you off the list.

3. Sit on your hands. Try not to get too antsy.

Jason is very busy at the moment so it might take a little longer than a few days, but If you want them quickly tell me and I'll let him know to prioritise you once he receives your payment.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...