Graham Perry Posted May 14, 2016 Share Posted May 14, 2016 Although my car is 1990 de-dion, we upgraded to the more modern 'non-trunnion' front suspension with swivels not long after it first became available many years agoMy brother and I were checking the car over today and detected a small amount of up and down play in the swivel at the end of the lower wishbone that never used to be there. Based upon the knowledge of Blatchat is the wear likely to be in the spherical joint mounted in the wishbone or wear in the upright itself ? If it is the joint, can it be replaced or do I need to buy a pair of wishbones ?Are all the spherical joints the same or have there been various versions ? Link to comment Share on other sites More sharing options...
SM25T Posted May 14, 2016 Share Posted May 14, 2016 Spherical joints. I have a source if needed. They can be a swine to remove. Link to comment Share on other sites More sharing options...
Wrightpayne Posted May 15, 2016 Share Posted May 15, 2016 There is stuff in the archives on this - do a search via google - 'lotus seven club spherical'.I've changed one in situe using threaded bar, nuts, big washers and various sockets to remove / refit.I replaced with a Minebea ABWT10 ® on my 98 dedion car. I can check the dimensions if needed as have a spare new one in stock for the other side when it goes!!RegardsIan Link to comment Share on other sites More sharing options...
Graham Perry Posted May 16, 2016 Author Share Posted May 16, 2016 Thanks guys, SM25T, I will be in touch in due course about sourcing a pair of joints. I just need to make some space in my garage first. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now