Jump to content
Click here if you are having website access problems ×

Oil Temp Not workin


W2TKY

Recommended Posts

Went for a blat round Cheshire this morning, noticed  straight away that when I flicked the switch for the "temp" that the gauge went back down to below zero,  is it the sender? Or something  else?

Had the 7 for six months now and it definitely worked before.

Regards Mark

 

Link to comment
Share on other sites

  • Member

Water and oil temperature on the same traditional gauge with a switch to select? Gauge working normally for water temperature?

What model of 7?

  1. Inspect and wiggle all the wires and connections.
  2. Test the continuity through the switch with a multimeter.
  3. Select oil temperature and short the lead that goes to the sender to earth: what does the gauge do?

Jonathan

Link to comment
Share on other sites

Presumably this is a car with an Apollo tank and the sender located on the side of the tank, it's worth checking that there is continuity between the tank body and earth as its not bonded via a wire connection to the chassis just the jubilee clips and base bracket, just occasionally I've seen a poor tank earth. It probably isn't that but it's worth checking.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...