Jump to content
Click here if you are having website access problems ×

Wanted: Extension lead for CTEK charger


Jonathan Kay

Recommended Posts

If you struggle to find one, why not chop the standard wire in the middle, fit some readily available connectors on the cut ends such that you could then either just plug them back together or fit an arbitrarily long piece of extension cable in the middle with the same connectors?
Link to comment
Share on other sites

Hi Jonathan

Which proprietary connectors are you needing? They changed at some point. 

 

These? 

http://motorcycle.com.vsassets.com/blog/wp-content/uploads/2014/02/022514-CTEK-battery-charger-4-connectors-518x389.jpg

or these?

Tamiya_Connector.gif

If it's the latter than I have some male and female and the correct crimp tool. Happy to make you up a lead FOC if I can do it from my bitsa box.

Cheers

Mark

Link to comment
Share on other sites

Ah sorry can't help then. 

No slight on your abilities - just that I bought a pack of 10 of the white male/female connectors recently to make an extension lead for my (old fashioned) CTEK charger and so I have a load of spares :)

 

P.S. <groan>current</groan> 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...