tom7 Posted February 5, 2003 Share Posted February 5, 2003 I'm looking to buy / borrow a nibbler to help in the fitting of my soon to arrive 4-2-1 exhaust. Can anyone tell me what guage the ali sideskin is? TIA Tom Link to comment Share on other sites More sharing options...
Paul-R Posted February 5, 2003 Share Posted February 5, 2003 Tom 20 gauge on the outer skin (side panels, rear panel) 16 gauge on the floor panels Alluminum is either NS3 or S1C type, according to Arch. Paul Link to comment Share on other sites More sharing options...
Peter Griffiths Posted February 5, 2003 Share Posted February 5, 2003 Tom, do you have a template, if so where did you get it from? Peter 7 Rosina C7 PRG XFlow + Clams The 24 carat Solution Link to comment Share on other sites More sharing options...
tom7 Posted February 5, 2003 Author Share Posted February 5, 2003 Paul - Many thanks Peter - Powerspeed provide more a rough guide than a template. The new hole will need finishing / shaping to something cosmetically acceptable. I will make a template as I go to show the original hole relative to the new one. This will be for a K engined car. Tom Link to comment Share on other sites More sharing options...
Steve-B Posted February 5, 2003 Share Posted February 5, 2003 get a dremel to smooth the edges...you know you deserve one 😬 Steve Metalic Black SV-VHPD click here to see our pictures.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now