7 wonders of the world Posted December 13, 2015 Share Posted December 13, 2015 Does anyone mount there Tillet directly to the floor ie without using either adjustable runner or the ally box sections?Aside from the lack of mounting surface area has anyone suffered any problems with floor deformation? Link to comment Share on other sites More sharing options...
Albert Donaldson Posted December 13, 2015 Share Posted December 13, 2015 When it was still mounted my passenger seat sat on two strips of 4mm(h) x 35mm(w) aluminium that appeared to be bonded to the lowered floor, the bolts passed through the strip and the floor no deformation even after squeezing a 100kg passenger in and taking him round the track. Not directly to the floor though. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted December 13, 2015 Author Share Posted December 13, 2015 Thanks Albert, that's the sort of thing I was thinking off as I know the lowered floors are a thicker gauge sheet but you cant really use the normal U section channel under the car as you'd rip it off.I'll get some strip form my local engineering place, might even go wider than the 35mm and I'll order a pack of Tillet spacers to set the seat angle too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now