allen Posted February 3, 2003 Share Posted February 3, 2003 Following an earlier thread I used Dow Corning Flue sealant to cure the leaks on the pipe joints, and it worked a treat. i now need to remove part of the system. Can anyone advise a removal technique? How strong and grippy is this stuff? Could or should I use a blow torch to overheat it and break it up that way? Advice please. allen Link to comment Share on other sites More sharing options...
Mole Posted February 3, 2003 Share Posted February 3, 2003 Don't do this when the firemen are on strike SV 52 CAT the mole is hibernating Link to comment Share on other sites More sharing options...
Anthony Posted February 3, 2003 Share Posted February 3, 2003 Allen, suggest this is a two person job - one to stop primaries being stressed through movement. Anthony VX the real way sideways Link to comment Share on other sites More sharing options...
allen Posted February 3, 2003 Author Share Posted February 3, 2003 *smile*Thanks for advice, turned out to not be anywhere near as difficult as I thought it might be Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now