simonpa Posted November 8, 2015 Share Posted November 8, 2015 Anyone have a half-decent A-frame for sale? I'm looking to replace my rather rusty one.Cheers - Simon Link to comment Share on other sites More sharing options...
ECR Posted November 9, 2015 Share Posted November 9, 2015 Take care, there's more than one size .... Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted November 11, 2015 Area Representative Share Posted November 11, 2015 As I have found out, fitted new one and couldn't understand why the car was almost undrivable, virtually no suspension travel and bouncing around all over the place!!Turns out it is shorter by about two inches than the original so back to the drawing board!! Link to comment Share on other sites More sharing options...
simonpa Posted November 12, 2015 Author Share Posted November 12, 2015 2 inches front to rear - that's a big difference! The dedion would be massively twisted?What size is your new one? I'll measure mine tonight - I know it's the older dedion one without the slightly offset forward lugs. The chassis has the dropped mounting lugs forward of the rear wheels. Cheers - Simon Link to comment Share on other sites More sharing options...
simonpa Posted November 12, 2015 Author Share Posted November 12, 2015 Just measured the current one - it's 48cm front to back overall, 45cm front-back through the bolt centres. Link to comment Share on other sites More sharing options...
2GBR Posted November 13, 2015 Share Posted November 13, 2015 Hi Simon just to let you know that the chassis I have for sale has the dropped mounts with A frame to fit ( slightly twisted though) would twist straight with a decent vice though Link to comment Share on other sites More sharing options...
simonpa Posted November 13, 2015 Author Share Posted November 13, 2015 Is that the one on eBay? That's me bidding.. Link to comment Share on other sites More sharing options...
2GBR Posted November 13, 2015 Share Posted November 13, 2015 Hi Simon, yes the ebay chassis is mine happy idding Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now