Jump to content
Click here if you are having website access problems ×

Car cutting out help


Phil

Recommended Posts

Hi all

I have a Duratec R500 2009 7 with a stack dash.

Driving along and the car just dies, all the dash goes blank and I have no power to anything.

Pressing the start button, the dash just flashes on and off as if it has a short, eventually it will start and run for a while but then it will do it again.

Any ideas please./sites/default/files/images/users/400/3_66.jpg

Link to comment
Share on other sites

  • Member

You need to check the battery voltage when it happens to exclude lack of smoke. But that doesn't sound likely.

No fuses blowing?

I think that losing all of those circuits but not the horn (with all the fuses intact) could be due to bad earth(s). (The horn is usually an earth switched circuit so doesn't depend on other earths.) Start with wiggling, disconnecting and cleaning them. As Ian says + ECU earth.

Jonathan

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...