Englishmaninwales Posted May 3, 2015 Share Posted May 3, 2015 I'm looking for a recommendation for an engine balancing company in Manchester, Liverpool or West Midlands area, please. Malcolm Link to comment Share on other sites More sharing options...
Mark Durrant Posted May 3, 2015 Share Posted May 3, 2015 MalcolmA little further south are Vibration Free Link to comment Share on other sites More sharing options...
Englishmaninwales Posted May 3, 2015 Author Share Posted May 3, 2015 MarkThanks, yes I've spoken with them, and they are my fall back, if I can't find anybody recommended closer to me up here in North TaffylandMalcolm Link to comment Share on other sites More sharing options...
DaveMorris Posted May 3, 2015 Share Posted May 3, 2015 Malcolm, I'm pretty suire that there is one in Wrexham .. .. will make a couple of phone calls on Tuesday (See who John Y uses - they seemes to do a reasonable job on mine).D Link to comment Share on other sites More sharing options...
7 wonders of the world Posted May 3, 2015 Share Posted May 3, 2015 or these http://www.andrewsprecision.co.uk/crankshaft-balancing/ Link to comment Share on other sites More sharing options...
Englishmaninwales Posted May 4, 2015 Author Share Posted May 4, 2015 Dave and 7wotw - Thanks.Malcolm Link to comment Share on other sites More sharing options...
DaveMorris Posted May 5, 2015 Share Posted May 5, 2015 Info obtained. Message sent. D Link to comment Share on other sites More sharing options...
Area Representative dikko Posted May 5, 2015 Area Representative Share Posted May 5, 2015 In the unlikely event this is for a crossflow you could consider a SCAT crank from SkyFord. Stronger & pre-balanced.Neil Bold engines Manchester BTW. Link to comment Share on other sites More sharing options...
Englishmaninwales Posted May 6, 2015 Author Share Posted May 6, 2015 Thanks all, now sorted with several choices.Malcolm Link to comment Share on other sites More sharing options...
Area Representative dikko Posted May 6, 2015 Area Representative Share Posted May 6, 2015 Would you have the time to share your research? Just in case others are in need. Link to comment Share on other sites More sharing options...
Englishmaninwales Posted May 6, 2015 Author Share Posted May 6, 2015 Yes, will do. Link to comment Share on other sites More sharing options...
Englishmaninwales Posted September 11, 2015 Author Share Posted September 11, 2015 Ok I used Mike Huddard Racing Engines, based in Audlem, Cheshire . First rate job, best idle I've ever had out of a Lotus Twin Cam and a horrible drive line vibration, which I had previously tried and failed to diagnose, all gone. Don't know about top end revs yet, but feels vastly improved.The engine was markedly out of balance in the crank and flywheel.He's very much old school, done in his back shed, so don't be put off by the surroundings.01270 811427.Malcolm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now