Merrick Linnett Posted April 30, 2015 Share Posted April 30, 2015 Evening,Could some one help me out?I need the Pagid Pad number for the Front Uprated brakes. EG 1265 or 2034.Pads I use are the RS14 or RS15.My spare set of pads are in my Tool box at work. Thanking you in advance*biglaugh*Merrick 69 Link to comment Share on other sites More sharing options...
Paul Deslandes Posted May 1, 2015 Share Posted May 1, 2015 You have two options with these brakes, depending on whether you want the pad to contact the full depth of the disk or a reduced outer sweep, i.e. the pad is narrower and outer covers the disk from the outer circumference to less than the inner. Not sure of percentage.The full depth pad is: U1265 RS15 Pad set race CP2340 D51 16mm when I bought them from Performance Braking a few years ago.If you decide to go for the full depth sweep, you may need to get your disks skimmed as the old CC supplied pads will be narrower type and will not have kept the inner part clean from rust and will not have worn.I have a set if you're interested but from your post I suspect you need them urgently. I'm near Guildford in Surrey.Paul Link to comment Share on other sites More sharing options...
Merrick Linnett Posted May 2, 2015 Author Share Posted May 2, 2015 Thank you Paul,You have explained why I have 2 different sets off front pads in my spares.The Pads I'm using after a lot checking are the Pagid (CP7600D46 (2034) RS15.)Completely different from the pictures I found on the Pagid web site.But they work well and were supplied by Circuit Supplies in Luton.Thank's again for the information.Merrick 69 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now