New Cat Posted April 18, 2015 Share Posted April 18, 2015 Hi,My windscreen washer tubing is well and truly clogged up and needs replacing. Please can you advise what exactly I need to remove to gain access to the jet onto the windscreen end of the tube?I've never removed the scuttle or windscreen and simply don't have the time to go on a venture of discovery to find out how it is done, so thank you very much in advance for your guidance! Link to comment Share on other sites More sharing options...
Titanium7 Posted April 18, 2015 Share Posted April 18, 2015 Should be able to reach underneath the dash to get access to the spray jet which is fixed the scuttle buy a nylon nut. New tube is usually thread up from the engine bay with the wiring loom from the top of the gearbox area. Good idea to stick the end of the new tube in a cup of boiling water to aid pushing it onto the end of the nozzle. Link to comment Share on other sites More sharing options...
RS2000 Posted April 18, 2015 Share Posted April 18, 2015 Ditto above - can gain access under dash - mine fell off once by itself - bit of a shock for my passenger when I tried to spray/clean the screen! Link to comment Share on other sites More sharing options...
New Cat Posted April 19, 2015 Author Share Posted April 19, 2015 Thanks guys, very helpful! Hopefully I'll get to this job very soon :)Jon Link to comment Share on other sites More sharing options...
New Cat Posted April 29, 2015 Author Share Posted April 29, 2015 Thanks again guys, armed with this knowledge it proved a quick and easy fix! The washer nozzels required a good de-gunking too with a pin. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now