S4Rossy Posted April 14, 2015 Share Posted April 14, 2015 Hi All, just started to build a Lotus 7 S4 from the chassis up. A few people hae asked for photos so here they are. So far two holes have been repaired (one appears to have been purposefully cut into the chassis, but I don't know what the purpose was), both holes visible in the photos and new side panels have been braised on. Moving onto suspension now, advice appreciated. Link to comment Share on other sites More sharing options...
nickh7 Posted April 15, 2015 Share Posted April 15, 2015 are the side panels steel or ali ? Link to comment Share on other sites More sharing options...
Area Representative Piers300 Posted April 15, 2015 Area Representative Share Posted April 15, 2015 You say the guy who worked on your chassis was in Deal. Was it done by a someone called Woolston ?Are you in Kent and local to the Canterbury area?Piers Link to comment Share on other sites More sharing options...
S4Rossy Posted April 24, 2015 Author Share Posted April 24, 2015 Steel, I think 18 gauge. At least that's what I asked for. Link to comment Share on other sites More sharing options...
S4Rossy Posted April 24, 2015 Author Share Posted April 24, 2015 Hi Piers, it was a guy called Peter Monks who is the owner at fabweld. He races bikes and, I think, builds them. Very nice guy and runs the company as a with his sons and daugher. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now