Area Representative dikko Posted March 29, 2015 Area Representative Share Posted March 29, 2015 I have found an issue with the porting of a cross-flow head...it has been done far too well! Opened out to perfection it has too much space for air to gulp through a little single carb and loses air speed - therefore - power at medium revs (4-5K) - and just where I need it the most... Absolutely perfect for twin carbs. Life is full of irony... Anybody know someone who understands and can port a head for a single carb??Anybody want two superb X-Flow Twin Carb heads? ............. Link to comment Share on other sites More sharing options...
Gary Stone Posted March 29, 2015 Share Posted March 29, 2015 Hi DikkoTry IKEngineering in Ifold, West Sussex. He knows his stuff with crossflows. He recently rebuilt my head & built my engine many years ago.Ike is his name...Mobile 07711 051391Work...01403 753373 Link to comment Share on other sites More sharing options...
Roger King Posted March 29, 2015 Share Posted March 29, 2015 Have you spoken to Angelo? Link to comment Share on other sites More sharing options...
Area Representative dikko Posted March 31, 2015 Author Area Representative Share Posted March 31, 2015 Do you think it would do any good? Link to comment Share on other sites More sharing options...
Roger King Posted April 1, 2015 Share Posted April 1, 2015 I don't know. I haven't seen him for a couple of years, but I'm making the assumption that he is still in business. Link to comment Share on other sites More sharing options...
Graham Perry Posted April 1, 2015 Share Posted April 1, 2015 Is Angelo still working ? He has done several heads for me over the years. All have been good. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now