Mexman Posted March 4, 2015 Share Posted March 4, 2015 Hi, I recently bought an R300 K -Series, it's idle rpm is just over 1100, which I think is a little high. Is this correct for the car, if not what should it be. Link to comment Share on other sites More sharing options...
SM25T Posted March 4, 2015 Share Posted March 4, 2015 Probably nearer 800-850 Link to comment Share on other sites More sharing options...
Gary Stone Posted March 4, 2015 Share Posted March 4, 2015 My SLR idles at about 1250 & still sounds lumpy. Link to comment Share on other sites More sharing options...
Mark w Posted March 4, 2015 Share Posted March 4, 2015 Is it on throttle bodies ? If so sounds ok . My old R400 was around this , any lower and it was VERY lumpy . Link to comment Share on other sites More sharing options...
Area Representative Paul Richards Posted March 4, 2015 Area Representative Share Posted March 4, 2015 My supersport ticks over at a similar level. Link to comment Share on other sites More sharing options...
Smithy77 Posted March 4, 2015 Share Posted March 4, 2015 Personal preference? Also, are you going by rev counter or ECU data reading? My rev counter reads 3-400rpm fast. I have a Supersport K and I recently had a Z&F remap and he suggested 1150rpm for Supersports for a smoother idle, so I went with that. Link to comment Share on other sites More sharing options...
Mexman Posted March 4, 2015 Author Share Posted March 4, 2015 It is on throttle bodies, thanks for the replies it sounds like its about were it should be. Link to comment Share on other sites More sharing options...
Cookie Monster Posted March 4, 2015 Share Posted March 4, 2015 Same car as me & also on TBs. Mine idles at 850 rpm Phil Link to comment Share on other sites More sharing options...
Area Representative Piers300 Posted March 5, 2015 Area Representative Share Posted March 5, 2015 My R300 K idles at about 1000 Rpm. Piers Link to comment Share on other sites More sharing options...
Baz Hemsley Posted March 5, 2015 Share Posted March 5, 2015 I have a Xflow and I'm idle most of the time. Link to comment Share on other sites More sharing options...
SM25T Posted March 5, 2015 Share Posted March 5, 2015 Hi Baz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now