Leadership Team RogNeedham Posted March 3, 2015 Leadership Team Share Posted March 3, 2015 I have recently fitted a new tank. When I removed the old tank and disconnected the electrical feed, I noticed that the connector on the pump side then became loose, thereby making reconnection impossible once fitted to the new tank - ie. nothing to push against.Before disconnecting I'm sure i noticed that the black electrical connector on the wiring loom side pushed into the pump connector so that it was flush with the tank.I asked a local auto electrican if he could refix the fuel pump connector to the fuel pump body so that it was firm. He has done this but the loom connector now sits about 10cm proud from the tank side.I now have a major fuel leak from this area....something is not sealing rightAnyone know of a decent pump repair outfit in the Midlands.Pump works fine - it's just that the leak will screw my fuel consumption*banghead* Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now