Andrew Dent Posted January 17, 2003 Share Posted January 17, 2003 Am after a K water rail, mainly for the threaded part for the temp sensor. Will donate to NTL as well Andrew 4 wheels on my 7 Link to comment Share on other sites More sharing options...
V7 SLR Posted January 20, 2003 Share Posted January 20, 2003 Andrew, it's also known as the "club foot" rail. There are 2 types and are identifiable by the location of the 2 temperature sender threaded holes. Earlier ones have them (the holes) either side of the head outlet, whilst the later ones have them (the holes) next to each other on the same side of the head outlet. I have a former, would like a latter. If I got a latter, I'd pass on the former. Worcs L7 club joint AO.//Membership No. 4379//Azure Blue SLR No. 0077//Se7ens List Tours Link to comment Share on other sites More sharing options...
Andrew Dent Posted January 20, 2003 Author Share Posted January 20, 2003 I want to reposition my water temp sender away from the exhaust. An old water rail would do teh job lovely, but it can always wait 4 wheels on my 7 Link to comment Share on other sites More sharing options...
Lawrence_Z Posted January 21, 2003 Share Posted January 21, 2003 Caterham are now doing an additional mini rail that fits in the bypass loop near the bell housing, and moves the 2 sensors away from the exhaust headers, you then blank off your existing sensor positions. Lawrence Link to comment Share on other sites More sharing options...
Andrew Dent Posted January 21, 2003 Author Share Posted January 21, 2003 Thank you, that was the information I was looking for. 4 wheels on my 7 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now