Harry Flatters Posted January 17, 2003 Share Posted January 17, 2003 Just fitting a widetrack kit and was wondering about camber. In the build manual it says that the top wishbone comes preset for the correct camber and should not need adjusting. Can this be relied on or should I get the camber checked? If so how do you keep fitting and splitting the top balljoint without knackering it or the wishbone? *arrowright*Harry Flatters *arrowright* AKA Steve Mell of Su77on Se7ens Link to comment Share on other sites More sharing options...
Fred Posted January 17, 2003 Share Posted January 17, 2003 Harry. normally it is ok but my last one was out not a lot but out. best to have it and the tracking adjusted .put a little oil on the tapered joint when you build it up. if you have to take it off to adjust ,you can just hit the top of the hub with a big hammer instead of a joint splitter.to remove. Link to comment Share on other sites More sharing options...
Harry Flatters Posted January 17, 2003 Author Share Posted January 17, 2003 Cheers Fred *arrowright*Harry Flatters *arrowright* AKA Steve Mell of Su77on Se7ens Link to comment Share on other sites More sharing options...
scooby dooby doo Posted January 18, 2003 Share Posted January 18, 2003 hmmm... mine were different, I've got about 1.5 on one side and 0.5 degrees on the other... HOOPY 500 kg R706KGU Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now