Screen retaining channels with captive nuts - same for S3/SV?

[AntonyH]

Hi all,

Are the screen retaining channels with captive nuts that Caterham sell of the same dimensions for S3s and SVs?

Left: http://caterhamparts.co.uk/product.php?id_product=302

Right: http://caterhamparts.co.uk/product.php?id_product=303

They're only listed under 'series 3' but that's true of several interchangeable parts on the Caterhamparts site.

Thanks

[Jonathan Kay]

If you don't get an answer here I suggest you email Darren at Caterham.

Happy New Year

Jonathan

[BigCol]

They're suitable for an SV too - I fitted a pair this time last year.  

I also bought the aluminium spacers but didn't need them, those might be for the S3!

[AntonyH]

Thanks BigCol. 

[BigCol]

dare say you know what you're doing but working on the basis it is better to have too much info than too little, I found this useful... http://www.pistonheads.com/GASSING/topic.asp?h=0&f=101&t=1206765&nmt=Fitting+aero+screen

the most difficult bit was undoing the two bolts holding the channel as they were off-centre and so couldn't get a socket onto them... seem to recall they're 10mm hex heads and was able, eventually, to remove them with a spanner; thereafter it was a piece of p***...!

[AntonyH]

dare say you know what you're doing

That's a big assumption!

Thanks for the link, very useful.