Juju Posted September 8, 2014 Share Posted September 8, 2014 Right; I have had my seven for six months now and it is time to get my hands dirty. My prisoner issue wheels have a three hole security plate on them but I don't have the tool to remove it. Any spares knocking about anywhere? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 8, 2014 Member Share Posted September 8, 2014 Could you add a photo? Jonathan Link to comment Share on other sites More sharing options...
Molecular--Bob Posted September 8, 2014 Share Posted September 8, 2014 If they are the original pin hole type then replacements are not available. I copied the pattern onto a piece of flat bar, and dropped steel pins through this into the holes in the nuts and used this as a tool to spin them out. Good luck and have the swear box ready, mine were fairly well stuck having not been off for 5 years. Just to add: redline told me that there were only 10 patterns, so you may get lucky with a borrowed one. Edited by - Molecular--Bob on 8 Sep 2014 12:48:13 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now