MarcNS Posted September 7, 2014 Share Posted September 7, 2014 I am re-fitting my fuel pump due to a small fuel leak and now have a bigger problem. Problem is when undoing the bolt to the pump connector the chamber bolt undid - me being stupid wanted to see what was inside and inside found a large spring, a small spring with a dome shaped piece of plastic with a pin for the smaller spring and what looks like a diaphragm/valve. I have set it with the dome shaped piece of plastic against the large spring in the chamber, next is the small spring and then the valve, which is inverted and seated in the base of the chamber Does anyone have an exploded diagram of a facet pump as when refitting it doesnt seem to be drawing through the fuel? Many thanks, Marc Edited by - Marcns on 7 Sep 2014 16:43:49 Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 7, 2014 Member Share Posted September 7, 2014 Have you got a part number? Have you tried Google Images? The top link leads to quite a lot of exploded diagrams. Jonathan Edited by - Jonathan Kay on 7 Sep 2014 17:32:17 Link to comment Share on other sites More sharing options...
MarcNS Posted September 7, 2014 Author Share Posted September 7, 2014 Thanks, I have a 3-4.5 bar square facet fuel pump. still trying to find the internal working of the pump on a diagram. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now