finmac Posted September 6, 2014 Share Posted September 6, 2014 Looking for a pre cut dash if someone has maybe upgraded to a stack? Would also consider an unused blank Link to comment Share on other sites More sharing options...
Garibaldi Posted September 7, 2014 Share Posted September 7, 2014 I have a RIF carbon dash blank in the garage somewhere. If I recall correctly it just has the steering column cut out but nothing else. Will go and find it. Cheers Gary Just re-read your post and you want a PRE CUT dash... Ho hum Edited by - Garibaldi on 7 Sep 2014 10:57:30 Link to comment Share on other sites More sharing options...
Mankee Posted September 7, 2014 Share Posted September 7, 2014 Finlay states that he would consider an unused blank. If he is not interested and your RiF dash is the "flat bottom" sort without the ears, I may well be interested. Link to comment Share on other sites More sharing options...
finmac Posted September 7, 2014 Author Share Posted September 7, 2014 Quoting Garibaldi: I have a RIF carbon dash blank in the garage somewhere. If I recall correctly it just has the steering column cut out but nothing else. Will go and find it. Cheers Gary Just re-read your post and you want a PRE CUT dash... Ho hum Edited by - Garibaldi on 7 Sep 2014 10:57:30 Hi Gary I would consider an unused blank. I will PM you. Cheers Link to comment Share on other sites More sharing options...
Grubbster Posted September 7, 2014 Share Posted September 7, 2014 If you decide to buy a new one then I can recommend this one from Ultimate Carbon. Make sure you are happy with the cutout though, it is a slightly older style with the 3 lights between speedo and tacho (I just put some lights in these for oil pressure warning). The dash needs quite a bit of trimming down to fit and there isn't a hole for the steering column so you need to be handy with a Dremel! Link to comment Share on other sites More sharing options...
Garibaldi Posted September 8, 2014 Share Posted September 8, 2014 Just for information the RIF dash has a lovely round bottom and big ears... Each to their own I guess.... I'll take some pictures... 😳 Cheers Gary Link to comment Share on other sites More sharing options...
Guest Posted September 10, 2014 Share Posted September 10, 2014 I've just bought a pre-preg one from Caterham to the tune of about £300 and it doesn't fit!! It's the one with the ears at the bottom and the radius on the passenger side makes the dash bulge out when you try and fit it correctly - and it needs a boat load of trimming and fettleing It's going back tomorrow - not happy.com !! Link to comment Share on other sites More sharing options...
Area Representative gileshudson Posted September 11, 2014 Area Representative Share Posted September 11, 2014 Quoting Barkalarr: I've just bought a pre-preg one from Caterham to the tune of about £300 and it doesn't fit!! It's the one with the ears at the bottom and the radius on the passenger side makes the dash bulge out when you try and fit it correctly - and it needs a boat load of trimming and fettleing It's going back tomorrow - not happy.com !! See this post about the amount of truimming required with carbon dashboards from Caterham If it's any encouragement, Guy's (Mavic82) dash looks awesome now it's trimmed and in place Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now