tomperkins Posted August 10, 2014 Share Posted August 10, 2014 Hi there, I'm in the process of raising my steering rack to reduce bump steer. As a result the steering gaitors now just clip the top of the opening in the body. Any advice on how to cut the body to enlarge or raise this opening slightly? Thanks in advance, Tom Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted August 10, 2014 Member Share Posted August 10, 2014 Try this thread. Jonathan Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted August 10, 2014 Share Posted August 10, 2014 I usually manage to cut my body every time I use a Stanley knife ... Link to comment Share on other sites More sharing options...
Area Representative Nick Chan Posted August 10, 2014 Area Representative Share Posted August 10, 2014 Using a dremel and the little abrasive pads with the sanding paper works very well. Easy to control and take just enough off. Otherwise I have used a metal file on the exhaust aperture and that works well too but go easy as the alloy sideskin are very soft and file away quickly... Link to comment Share on other sites More sharing options...
tomperkins Posted August 11, 2014 Author Share Posted August 11, 2014 Thanks for the responses guys. Got myself a flapper wheel today, give that a go. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now