andyjstone Posted August 1, 2014 Share Posted August 1, 2014 I've been missing a clock on my dash and got hold of a Caterham CSR one so it matches the other gauges. First it has a 6-pin socket on the back, is the 6-pin Econoplug? Second, does anyone have the wiring detail for this? Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 1, 2014 Share Posted August 1, 2014 Photo please. Any identification markings on the clock? Jonathan Link to comment Share on other sites More sharing options...
andyjstone Posted August 1, 2014 Author Share Posted August 1, 2014 On the back it says 'CAERBONT AUTOMOTIVE FAC1-1052-01B 60D001A TIME CLOCK' One the back it has a rectangular connector with 2 x 3 pins, as there is no clock adjustment knob on the front I am assuming 2 pins for power, one for light and two (or three) for time setting. Pics here: https://www.dropbox.com/sh/gupfx4e46goye16/AACG0sRTdtvRFlxRpA3BVJ16a Link to comment Share on other sites More sharing options...
6speedmanual Posted August 1, 2014 Share Posted August 1, 2014 E-mail Caerbont? Peter Link to comment Share on other sites More sharing options...
andyjstone Posted August 1, 2014 Author Share Posted August 1, 2014 Tried that, emailed Caerbont and Caterham and no reply from either! I could try a bit of trial and error or open it up and try and work it out, but would rather have the info if available. Link to comment Share on other sites More sharing options...
tbird Posted August 1, 2014 Share Posted August 1, 2014 There is a sub loom listed on Caterham shop, which looks like it maybe the adjuster, just had a look at CSR dash wiring diag and can't see clock listed . sorry hadn't realised it is from a CSR175 thought I hadn't seen one on a 200 or 260, no idea where you will find wiring diagram for CSR175 Tim Edited by - tbird on 1 Aug 2014 23:22:07 Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 1, 2014 Share Posted August 1, 2014 Brochure with wiring instructions Jonathan Link to comment Share on other sites More sharing options...
andyjstone Posted August 1, 2014 Author Share Posted August 1, 2014 I have that but it doesn't help as the one I have didn't come with the loom so I need the pin-out for the connector. Link to comment Share on other sites More sharing options...
andyjstone Posted August 2, 2014 Author Share Posted August 2, 2014 Took it apart and worked it out, in case anyone else needs to know: Looking at the back of the unit with the connector at the top: Bottom right - ground Top right - light Bottom left - ground Top left - power Middle pair - set switch Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now