SUPERLIGHT91 Posted May 26, 2014 Share Posted May 26, 2014 how best to deal with gel-coat and colour cracks in fibre glass wings? the typical star-crazed stone chips for underneath - how best to deal with these? anyone suggest an effective DIY filling for an improved/invisible finish on a BRG glass fibre winged car? thanks Link to comment Share on other sites More sharing options...
Pete Underhill Posted May 26, 2014 Share Posted May 26, 2014 At only £57 for a cycle wing, I'd be tempted not to waste time trying to rescue a badly damaged one. Obviously, if you have clamshells, it's a different matter. Link to comment Share on other sites More sharing options...
Area Representative Paul Richards Posted May 26, 2014 Area Representative Share Posted May 26, 2014 New wings. If they are self coloured cycle wings they are fairly inexpensive and probably more cost effective than repairs. Edited to say - Must type faster. Edited by - Paul Richards on 26 May 2014 22:44:49 Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted May 26, 2014 Author Share Posted May 26, 2014 I have 4 in one BRG clamshell, 3 in the other, and one in a rear wing to deal with... Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted May 26, 2014 Author Share Posted May 26, 2014 That is a good point about new being fairly inexpensive to simply bolt on - I will have to check if the green standard Caterham Green and go from there. I expect there is some sort of miracle resin filler that might improve appearance, stop it spreading. That is the beauty of carbon wings - you don't generally get these marks on those, even when painted. M Link to comment Share on other sites More sharing options...
elie boone Posted May 27, 2014 Share Posted May 27, 2014 There is no quick fix, you grind the star in a V with a dremel, degrease then use some putty with fibers and sand the whole surface. When you have done this use fine putty to finish and repaint. or u could try to fill them with Sicaflex 😬 sand the spot and repaint. I never try this but in theory it can work Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted May 27, 2014 Author Share Posted May 27, 2014 Worth a try thanks - Sicaflex sounds good worth a go, thanks. Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted May 27, 2014 Author Share Posted May 27, 2014 Sicaflex got me thinking and: yes of course - its fibre glass like my boat - careful gel coat filler and local paint touch up would probably do it. I was just curious whether anyone had found a miracle clear filler that seals the star-cracks to make them less obvious without having to repaint. Link to comment Share on other sites More sharing options...
Baz Hemsley Posted May 28, 2014 Share Posted May 28, 2014 You could fit new ones but the new rear wings on mine are not as thick as the old ones. First decent blat and you are back to square one. Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted May 28, 2014 Author Share Posted May 28, 2014 Yes - true that and the only good excuse to upgrade to carbon :) - doesn't tend to happen to that material due to strength and a bit of 'give' in the weave Link to comment Share on other sites More sharing options...
Area Representative Paul Richards Posted May 28, 2014 Area Representative Share Posted May 28, 2014 Quoting Baz Hemsley: You could fit new ones but the new rear wings on mine are not as thick as the old ones. First decent blat and you are back to square one. Yes the new rear wings are as fragile as butterfly wings, so I glued camping mat to the underside of mine and it appears to stop further damage. LADS top tip Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted May 28, 2014 Author Share Posted May 28, 2014 now that is a good idea re. camping mat - its nice and light and will absorb stones nicely. great thinking - its that kind of idea I like :) Link to comment Share on other sites More sharing options...
David Brown Posted May 28, 2014 Share Posted May 28, 2014 Others have painted with a heavy coat of underseal which absorbs the stone damage (wish I had done it) Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted May 28, 2014 Author Share Posted May 28, 2014 ah yes - they old gloopy Waxoil rubbery paint could work well too - although I suppose it all adds weight - but better than excessive glass fibre star cracks of course. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now