Guy Lowe Posted May 23, 2014 Share Posted May 23, 2014 Bit of a long shot this one, has anyone got an S3 X Flow bonnet they do not need, the 6 louvre panel re circulating heater type with cut out for carbs? Painted or unpainted with or without catches but must be undented and preferably within a reasonable distance of GU15 so I can collect. Guy Link to comment Share on other sites More sharing options...
andy_h Posted May 23, 2014 Share Posted May 23, 2014 I use to have one from mine but not sure if I sold it. I'll check in the garage tonight. Link to comment Share on other sites More sharing options...
LesG Posted May 23, 2014 Share Posted May 23, 2014 I have one, in red, came off my car after I converted to K Series, it does have a couple of dents in it, and I did make a blanking panel to fit the cutout, so there are four rivet holes in it. You can have it for a donation to NTL, and I'm sure there will be the possibility of a GONADS delivery? I'm sure it'll do until a better one comes along anyway. Les Link to comment Share on other sites More sharing options...
andy_h Posted May 23, 2014 Share Posted May 23, 2014 Sorry Guy, checked my garage and I've wings and nose cones but no bonnet. I must have sold it. Link to comment Share on other sites More sharing options...
Guy Lowe Posted May 23, 2014 Author Share Posted May 23, 2014 Andy, thanks for looking Les, I'll pass thanks as my bonnet is usable but now has a crease in it after I left my car overnight in a public car park in Swansea last weekend. I know, I know only an idiot would leave a 7 in a public car park in Swansea overnight Looks like I am going to have to buy a new one Guy Edited by - Guy Lowe on 24 May 2014 08:24:13 Link to comment Share on other sites More sharing options...
SiCrad Posted May 23, 2014 Share Posted May 23, 2014 Guy, YHM Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted May 23, 2014 Area Representative Share Posted May 23, 2014 Guy, I have one in bare Ali if that is what you are looking for? Regards Paul. Link to comment Share on other sites More sharing options...
Guy Lowe Posted May 24, 2014 Author Share Posted May 24, 2014 Simon - YHM Paul - that sounds ideal, how much do you want for it? Guy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now