Ian B Posted May 4, 2014 Share Posted May 4, 2014 Similar to Carcoon, but has internal frame, and end and side roll up doors, so you could drive the car in/out without having to deflate it and lift it off the car. Only problem was I had to use it outside for a while and it was wrecked in a storm So the remains are going to the tip unless anyone wants them. The clear plastic panels of the sides, ends and roof are toast, but the basic panel surrounds and zips are fine, as is the base mat (may be useful under the car to work on - or keep the oil off the living room carpet 😬). About 1/2 the fibreglass poles are intact as are about 1/2 the plastic corner joints. Fans work but may need 12vdc power supply if I can't find the original! I guess it could be repaired with spare parts from manufacturers Air-Flow, and some new plastic infill panels stitched in, but would be quite a bit of work. (They're £448 new!) It's a "Size 3" measuring 4.5 x 2.0 x 1.8 (L x W x H)m. It's in the original bag that measures 40 x 30 x 110 cm Free to collect from Mayfield TN20 6, or could possibly get it to North Kent, East Sussex or Kentish Weald meets. Edited by - Ian B on 4 May 2014 17:00:40 Link to comment Share on other sites More sharing options...
Peyote Posted May 5, 2014 Share Posted May 5, 2014 Mail on the way Link to comment Share on other sites More sharing options...
Ian B Posted May 5, 2014 Author Share Posted May 5, 2014 And replied Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now