glasgow Posted March 31, 2014 Share Posted March 31, 2014 Going to fit a new exhaust guard (standard 6" to fit a K series 5" silencer). Would you just fix the brackets to the silencer with three jubilee clamps or you would also use a "glue/adhesive" between the brackets and the silencer (It looks as though there was some sort of "adhesive" between the old brackets and the silencer... or may be just my imagination..." Also any suggestions for stainless steel jubilee clamps? Thank you Ahmed Link to comment Share on other sites More sharing options...
revilla Posted March 31, 2014 Share Posted March 31, 2014 Pretty sure mine is just jubilee clipped directly onto the exhaust. I was looking at it with my Dad at the weekend as we were discussing fitting an exhaust guard to a kit car he has. Link to comment Share on other sites More sharing options...
Roger Ford Posted March 31, 2014 Share Posted March 31, 2014 No adhesive. Caterham used to sell suitable jubilee clips but I can't find them now. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted March 31, 2014 Member Share Posted March 31, 2014 There's a supplier of long stainless clips in this thread or you can daisy-chain shorter ones. Jonathan Edited by - Jonathan Kay on 31 Mar 2014 16:30:42 Link to comment Share on other sites More sharing options...
John Vine Posted March 31, 2014 Share Posted March 31, 2014 I think this is the clip you need (x3). ETA: You can also get them here (excellent shop -- not far from me). JV Edited by - John Vine on 31 Mar 2014 16:50:32 Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted March 31, 2014 Share Posted March 31, 2014 No adhesive. Link to comment Share on other sites More sharing options...
tbird Posted March 31, 2014 Share Posted March 31, 2014 No Adhesive, got nice stainless Mikalor from http://www.advancedfluidsolutions.co.uk, you will need to measure your can it will be different from mine Tim Edited by - tbird on 31 Mar 2014 18:06:37 Link to comment Share on other sites More sharing options...
djg Posted March 31, 2014 Share Posted March 31, 2014 Halfords sell ones that fit nicely. I had to get one ordered in as they only had 2 on the shelf but they do the job. Doug Link to comment Share on other sites More sharing options...
Wrightpayne Posted March 31, 2014 Share Posted March 31, 2014 Hi, I used a Sealey Universal Hose Clip set (JC972) from which you can make clips any size. Added advantage is when the rear one gets ground through (as they do sometimes 😬) you can simply make another. Kit comes with 8 screws and 3m of band. Regards Ian Link to comment Share on other sites More sharing options...
glasgow Posted March 31, 2014 Author Share Posted March 31, 2014 Thank you all.... I think CC are not Stainless steel.... Will try halfords or screwfix tomorrow, thanks again Link to comment Share on other sites More sharing options...
virden Posted April 1, 2014 Share Posted April 1, 2014 Having clouted the bottom of my silencer on many occasions I have found that Jubilee clips can also be used to hold in place a discrete rubbing plate at the noise end of the box. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now