New build (FIA Roll over bar)

[PhilD]

Hi

The two bolts that locate the FIA roll bar into the bucket bush, do not appear to have been supplied by Caterham, does anyone know the correct size and thread? The build manual suggests 7/16 but these are a little too big *confused*

 

Also I appear to be short of of the bolt for "A" frame to De Dion tube, any idea's to size etc.

 

Many thanks for any help with this,

 

Happy Christmas and all the best for the New Year to all Se7eners

 

Phil

 

 

 

 

 

[Richard Price]

From an earlier thread on the same subject:-

"Found them!!! They were in the miscellaneous bag!!!

 

Thanks for the flat head description, wouldn't have located them without that."

 

I recall a similar search myself! I think they are 3/8" with the heads machined thinner to clear the top of the damper eye.

[Ian B]

Thought you would have finished by now with Nathans help

 

Ian - MI 5EVN - No Longer Sumpless 😬

 

Edited by - Ian B on 21 Dec 2002 20:16:32

[PhilD]

Thanks Richard.....found them in the interior trim box, 2 bolts with machined heads in a bag marked head restraint......all part of the Caterham experience I suppose *wink*

 

Still not sure about the 'A' frame bolt, doh. 🤔

 

Ian, Nathan's building his own car !!!!!!!!!!!!!! *wink* *wink* (not, ha ha)

cheers mate

 

 

Edited by - PhilD on 21 Dec 2002 23:53:38

[Ian B]

I'm sure you'll let him drive yours

 

Goodnight - I'm leaving the office now ❗ - but back tomorrow ☹️

 

Ian - MI 5EVN - No Longer Sumpless 😬