Simon.Rogers1 Posted March 17, 2014 Share Posted March 17, 2014 Selling as a kit of parts for tuning a Rover K Series VVC head. New piper inlet cam. Still in sealed bag. Used exhaust cam but in very good condition. PIPER VVC exhaust cam (2700 duration) new (£75) PIPER VVC solid inlet cam (custom duration, in the middle of a 2850 and 2700) new (£250) Uprated valve springs and standard springs. Valve seals 3 2 full stets and one new set for new big inlet valves. Retaining clips. Full set of 27.3mm exhaust valves. New inlet valves 33.5mm. Skimmed and valves by XRN engineering Full set of used tappets. Used but in good condition 1800cc crank also available foc if wanted. Crank ground and polished. Not sure on value so I have therefore listed them on Ebay. here Link to comment Share on other sites More sharing options...
rj Posted March 17, 2014 Share Posted March 17, 2014 Simon For a spare engine I'm short of a standard crank, and could be interested in this. Do you know where bearings could be obtained when it has been ground? Link to comment Share on other sites More sharing options...
Simon.Rogers1 Posted March 17, 2014 Author Share Posted March 17, 2014 Hi RJ Sorry I do not. It was ground before it was purchased by ex club member. I'm happy to remove it from the auction and you can have it for the cost of shipping or the next time you are over. Its just taking up space! Link to comment Share on other sites More sharing options...
rj Posted March 17, 2014 Share Posted March 17, 2014 Hi Simon Thanks. I'll post a question in techtalk to see if I can sort bearings. Otherwise it does not make sense :-p Link to comment Share on other sites More sharing options...
rj Posted March 19, 2014 Share Posted March 19, 2014 Simon, Following Daves answer to my question re bearings: If you could post it I'd be grateful. Link to comment Share on other sites More sharing options...
Simon.Rogers1 Posted March 20, 2014 Author Share Posted March 20, 2014 ending tonight. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now