evotell Posted February 27, 2014 Share Posted February 27, 2014 Does any body know what the clearance is from the very top of the motor to the bonnet? I would be most grateful if someone could help me out. 😬 Link to comment Share on other sites More sharing options...
Steve Cornford Posted February 28, 2014 Share Posted February 28, 2014 SV Highest point of motor is the top of the oil filler cap, clearance to bonnet 20mm. However on Sigma 160 the air intake has a metal plate that gives about 10mm clearance to bonnet, and the block of foam that is mounted on this plate actually touches the bonnet. Hopefully someone with an S3 can respond with their measurements. Link to comment Share on other sites More sharing options...
ChrisC Posted February 28, 2014 Share Posted February 28, 2014 I have not measured, but the filter does touch the bonnet on a S3   Here is a side where you can see the Throttle Bodies and filter plate in relation to the engine   Hope this helps Link to comment Share on other sites More sharing options...
evotell Posted February 28, 2014 Author Share Posted February 28, 2014 Thanks guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now