Area Representative marcos59 Posted December 16, 2013 Area Representative Share Posted December 16, 2013 Second hand forged and std bore if possible but open to other options Thanks ! Edited by - marcos59 on 17 Dec 2013 08:14:49 Link to comment Share on other sites More sharing options...
7 wonders of the world Posted December 17, 2013 Share Posted December 17, 2013 Have you tried calling Accralite (now part of Omega) they usually carry good stock across the board and will deal direct too. Accralite Link to comment Share on other sites More sharing options...
Area Representative marcos59 Posted December 17, 2013 Author Area Representative Share Posted December 17, 2013 Thanks for your answer, I have edited my post....I search a budget option so second hand if possible. Even std piston well pocketed could suit....just seen mine have been VERY badly done with a wood knife ...yes really I didn't sleep seen my engine without cylinder head... Link to comment Share on other sites More sharing options...
7 wonders of the world Posted December 17, 2013 Share Posted December 17, 2013 I assume your looking for a set? I'd still give them a call as I heard thety were looking to reduce stock levels somewhat since they are consolidating the duplcaiton across the two brands somewhat - could be a bargin to be had. Are you looking to increase the diameter or depth of the cut outs? as the diameter can be easily and accurately done by hand. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now