Dr Slotter Posted November 29, 2013 Share Posted November 29, 2013 I'm after a single 6 or 6.5 inch wheel in R14. Style/design and condition not important, as long as they hold pressure. Thanks :) Edit - to remove R15, as now got one. Edit2 - to remove R13, as now got one. Edited by - Dr Slotter on 4 Feb 2014 12:02:52 Link to comment Share on other sites More sharing options...
AntonyH Posted November 29, 2013 Share Posted November 29, 2013 Presumably they *have* to be 6" for a fair comparison? I have a spare 8" R15... Link to comment Share on other sites More sharing options...
David Lynch Posted November 30, 2013 Share Posted November 30, 2013 Dropped a few old KN minators off at Kimberworth not long since Tom. If not been scrapped yet one was scuffed but serviceable. The other was remodelled by the kerb ☹️ ET23 6x13 Link to comment Share on other sites More sharing options...
Dr Slotter Posted November 30, 2013 Author Share Posted November 30, 2013 Yes, ideally all the same width for DoE reasons... David - by 'Kimberworth' do you mean with Dave? Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted December 4, 2013 Share Posted December 4, 2013 See my 15" wheel here The original poster has first dibs .... but it probably won't be blemish-free enough for him Link to comment Share on other sites More sharing options...
Dr Slotter Posted December 4, 2013 Author Share Posted December 4, 2013 Link to comment Share on other sites More sharing options...
Dr Slotter Posted December 11, 2013 Author Share Posted December 11, 2013 Got a 15" wheel now from SM25T (thanks!), still looking for 13" and 14". Link to comment Share on other sites More sharing options...
myothercarsa2cv Posted December 12, 2013 Share Posted December 12, 2013 Out of interest, what do you need it for? I will have on Saturday a spare set of 14s, so if you wanted to borrow one you could, but I'd need it back. Link to comment Share on other sites More sharing options...
Dr Slotter Posted December 12, 2013 Author Share Posted December 12, 2013 Thanks for the offer John, but they're for an experiment and will get covered in spray paint. Link to comment Share on other sites More sharing options...
myothercarsa2cv Posted December 12, 2013 Share Posted December 12, 2013 I will be painting them anyway at some point as they are a bit tatty. So really not a problem But you're in Sheffield, which may be Edited by - myothercarsa2cv on 12 Dec 2013 14:30:59 Link to comment Share on other sites More sharing options...
Dr Slotter Posted January 6, 2014 Author Share Posted January 6, 2014 Now got a 13" wheel (thanks Chris!), still looking for a 14". Link to comment Share on other sites More sharing options...
Dr Slotter Posted February 4, 2014 Author Share Posted February 4, 2014 Still after a 14". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now