Gnockoff Posted November 5, 2013 Share Posted November 5, 2013 After messing about with a couple of electrical senders at £50.00 or so a pop, I went mechanical this summer. For the same money from Think Automotive, they sent me a new gauge, all the correct fittings and braided hoses. Very easy to do. I don't know why I persisted for so long with the old set up. I was so used to seeing 2 bar on the gauge, it was quite reassuring to have a steady 56 psi at 4k with a hot engine (Mobil1, 0w40) Brian Link to comment Share on other sites More sharing options...
myothercarsa2cv Posted November 5, 2013 Share Posted November 5, 2013 And the website is now updated with Ian's write up. Fit an MOPG by Ian Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted November 5, 2013 Share Posted November 5, 2013 Well done John Link to comment Share on other sites More sharing options...
nickh7 Posted November 6, 2013 Share Posted November 6, 2013 no excuse now with those step by step instruction it really is very easy to do , it must be I did it 😬 Link to comment Share on other sites More sharing options...
Smithy7 Posted November 6, 2013 Share Posted November 6, 2013 Its so easy even I did it in half an hour. The only parts you need are These gauge, 3m piping with threaded ends and an adapter but let them know the thread. Mine doesn't have a light which make it easier. And it's not much more expensive than a new sender. Good luck. Dave Edited by - Smithy7 on 6 Nov 2013 19:13:09 Link to comment Share on other sites More sharing options...
tweeky Posted November 7, 2013 Share Posted November 7, 2013 Glasgow i have the caterham remote oil mounting kit (never firtted) sat doing nothing at home !!!! Link to comment Share on other sites More sharing options...
RS2000 Posted November 7, 2013 Share Posted November 7, 2013 *thumbup* Ian and John *thumbup* Thank you Link to comment Share on other sites More sharing options...
myothercarsa2cv Posted November 7, 2013 Share Posted November 7, 2013 I only did the easy bit 😶🌫️ Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted November 7, 2013 Share Posted November 7, 2013 ..... watching 😬 Link to comment Share on other sites More sharing options...
glasgow Posted November 7, 2013 Author Share Posted November 7, 2013 Tweeky, thank you for your offer but I will try to go mechanical..... Ian can do it in 30 minutes so I should be able to do it in 3 hours Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now