Crumpynut Posted September 2, 2013 Share Posted September 2, 2013 My indicators have stopped working, have done all the usual checked the fuse, wiggled the relay etc but not yet resorted to meter and trying to unfathom the unredable wiring diagram I have. Any suggestions of common faults? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 2, 2013 Member Share Posted September 2, 2013 Wiggled and operated the hazard warning light switch a few times? Jonathan Link to comment Share on other sites More sharing options...
Area Representative Katie Posted September 2, 2013 Area Representative Share Posted September 2, 2013 Hi Try replacing the flasher unit. Mine developed an intermittent fault - sometimes it flashed, sometimes the indicators just stayed on. I replaced the flasher unit with a £2 one from Amazon and so far so good. Best of luck with yours. Ivan Link to comment Share on other sites More sharing options...
The Pikey Posted September 2, 2013 Share Posted September 2, 2013 bound to be a dodgy hazard switch I'd say. J Link to comment Share on other sites More sharing options...
John Vine Posted September 2, 2013 Share Posted September 2, 2013 Some tips here. JV Link to comment Share on other sites More sharing options...
Crumpynut Posted September 2, 2013 Author Share Posted September 2, 2013 Thanks everyone, several things to try and several I have already. Will give it all a go and come back for more if no luck. My moneys on the hazard switch or flasher relay Link to comment Share on other sites More sharing options...
Steve-B Posted September 2, 2013 Share Posted September 2, 2013 Take the flasher relay out and use an emery board on the contacts that plug into the relay socket.... I know quite a few have had that issue and the fix worked for us too.... Edited by - Steve-B on 2 Sep 2013 23:15:40 Link to comment Share on other sites More sharing options...
john milner Posted September 4, 2013 Share Posted September 4, 2013 My front indicators packed up when the glue holding the earth wire to the wing stay broke down. I fixed by running a separate earth back to the main chassis. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now