Phil Posted August 10, 2013 Share Posted August 10, 2013 Is the test done when hot or cold, does it matter? Phil Link to comment Share on other sites More sharing options...
Titanium7 Posted August 10, 2013 Share Posted August 10, 2013 Comprehensive article here Link to comment Share on other sites More sharing options...
Phil Posted August 11, 2013 Author Share Posted August 11, 2013 Thanks Did the test this afternoon, found some water down the hole of plug number 4 [back of engine] blew this out with some compressed air, removed plugs and the coil lead. All cylinders exactly the same at just over 14 psi Result, happy now. Phil Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted August 11, 2013 Member Share Posted August 11, 2013 140 psi? Jonathan Link to comment Share on other sites More sharing options...
Phil Posted August 11, 2013 Author Share Posted August 11, 2013 Is that not very good then? Sorry 14 BAR Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now