simonpa Posted August 8, 2013 Share Posted August 8, 2013 Spent a couple of hours changing a lower suspension arm on SWMBO's car last night - most of which was taken up drifting a bush out and a new one in.. Still got the other side to do, but have done enough for the MOT this time. Anyone have a press languishing that they are not likely to need again, before I start trawling ebay/toolstation/machinemart? Any recommendations for what to buy/avoid? Cheers - Simon Link to comment Share on other sites More sharing options...
shn7 Posted August 8, 2013 Share Posted August 8, 2013 Last time I did such a job I simply took the arm and new bush to a local garage who obliged. Think I gave them a tenner. Less hassle and cost than buying a press which is likely to get very little use. Link to comment Share on other sites More sharing options...
simonpa Posted August 8, 2013 Author Share Posted August 8, 2013 I have been doing that and am at the stage where a press will pay for itself within a year.. Link to comment Share on other sites More sharing options...
shn7 Posted August 8, 2013 Share Posted August 8, 2013 Fairy nuff! BTTT on me then Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now