2.25" conical spring caps to borrow, possibly to buy

[Mankee]

Now got all of the bits below. Need 2.25" conical caps now!

 

Just wondering if anyone has the above spare, please. I did have a spare ARB bracket but gave it away with an ARB. I'm sure I've got some front damper lowering mounting sleeves but I must have given them away as well. And the spring cap of one of my replacement dampers isn't slotted, which means the eye has to come off to remove the spring.

 

Thanks!

 

http://www.caterhamparts.co.uk/img/p/592-592-large.jpg

 

http://www.caterhamparts.co.uk/img/p/20-20-large.jpg

 

http://www.caterhamparts.co.uk/img/p/779-779-large.jpg

 

Edited by - Mankee on 16 Aug 2013 17:46:03

 

Edited by - Mankee on 16 Aug 2013 17:54:17

[simonpa]

Hi Mankee,

if you only need 1 ARB bracket, then I have a single spare you are welcome to.

I may have a spare spring cap - will look in the garage tonight.

 

Drop me a mail when you get a minute, so I don't forget!

 

Cheers - Simon

 

[Mankee]

Thanks to Simon and Redline for the original bits I needed. Turns out that I couldn't use the flat 2.25" upper spring caps anyway, because I have to run the front dampers inverted on my 96 chassis and the caps clout the wishbone!

 

So now I need another pair of 2.25" conical spring caps for the rear dampers, as the flat caps hit the inside of the damper turret. I am swapping from 1.9" to 2.25" springs by the way, so I hope that the conical caps will solve the problem. Does anyone have a pair that I could try and then buy if they are suitable?

 

Thank you!

 

http://www.caterhamparts.co.uk/img/p/591-591-large.jpg

 

Edited by - Mankee on 16 Aug 2013 17:53:48

[Mankee]

Internet fail...

 

Edited by - Mankee on 16 Aug 2013 17:53:22