Mark-G Posted July 23, 2013 Share Posted July 23, 2013 Hi there Has anyone please got a wiring diagram for a K series eu2 as well as eu3 please. Many thanks Mark Link to comment Share on other sites More sharing options...
Jonathan Kay Posted July 23, 2013 Share Posted July 23, 2013 A generous member offered to share it in this thread. Jonathan Link to comment Share on other sites More sharing options...
Roger Ford Posted July 23, 2013 Share Posted July 23, 2013 here you go: here. Says it's for EU2 and EU3. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted July 23, 2013 Share Posted July 23, 2013 Wasn't there some discussion about the main diagram/ loom being the same for both, but the engine subloom being different, and one of those diagrams being hard to find? Jonathan Link to comment Share on other sites More sharing options...
Mark-G Posted July 23, 2013 Author Share Posted July 23, 2013 Many thanks guys The tricky part and what I am after is to see the ecu pin connectors for EU2 and where a air temp sensor is wired into. Thanks Mark Link to comment Share on other sites More sharing options...
Mankee Posted July 23, 2013 Share Posted July 23, 2013 An Emerald is EU2 plug-compatible, so if you find the pinout for one, you'll be able to see which pins lead to the air temp sensor. The Emerald manual is below, check pages 55 and 56: http://www.emeraldm3d.com/software-manuals Link to comment Share on other sites More sharing options...
Mark-G Posted July 23, 2013 Author Share Posted July 23, 2013 Cheers Mankee Link to comment Share on other sites More sharing options...
john milner Posted July 23, 2013 Share Posted July 23, 2013 Tom's Wiki Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now