Garibaldi Posted July 18, 2013 Share Posted July 18, 2013 For the boat anchor fans out there…. Set of unmolested SBD supplied 87.5mm Omega intruder pistons mounted on QED supplied H pattern forged rods with ARP big end bolts. £450 Removed from 270bhp steel Vx as gone with slipper pistons at last rebuild. SBD/Jenvey aluminium inlet manifold prepped to mount Jenvey 48 taper throttle bodies on VX. £80 Set of new/unused Magnecor Competition spark plug leads for Vx with std Coilpack. £45 Can send photos on request. Above plus P&P as cost Thought I would try on here before heading to Pistonheads. Gary Edited by - garibaldi on 18 Jul 2013 11:31:45 Link to comment Share on other sites More sharing options...
TIM 5O Posted July 18, 2013 Share Posted July 18, 2013 YHM Link to comment Share on other sites More sharing options...
I reply to every thread Posted July 18, 2013 Share Posted July 18, 2013 Interested in leads/coilpack if not gone? Link to comment Share on other sites More sharing options...
Garibaldi Posted July 18, 2013 Author Share Posted July 18, 2013 Hi Aves Tim above got there first on the leads so its down to him at the mo Link to comment Share on other sites More sharing options...
TIM 5O Posted July 19, 2013 Share Posted July 19, 2013 Hi Gary Sorry for delay please can I have the leads will mail you re payment/delivery thanks Tim Link to comment Share on other sites More sharing options...
keybaud Posted July 19, 2013 Share Posted July 19, 2013 Gary, YHM about the manifold. Text of email is as follows: "Please can you let me know the Jenvey part number of the manifold or could you let me know the diameter of the hole the throttle bodies connect to. The standard part is MV07 and has a 45mm diameter, but I do not know if the SBD one is standard or modified; however, I'd guess that the TBs taper from 48mm to 45mm, so it should be standard. Also, is the manifold ported at all at the cylinder head side? I have a C20XE with a JRE Ultimate manifold and tapered throttle bodies, but the manifold is designed for an oversized cylinder head port, whereas mine has only a small amount of 'porting', so I have a step between the manifold and the cylinder head." Link to standard manifold details here Simon Edited by - keybaud on 19 Jul 2013 18:47:49 Link to comment Share on other sites More sharing options...
Garibaldi Posted August 6, 2013 Author Share Posted August 6, 2013 BTTT Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now